The DWA-2 ( WMA 3000) 600 ft transmission driveway alarm is packed with features the  competition can only dream of and the best thing is the PRICE . Read further to see why this will be one of the best new alarms you will find today

Wireless Motion Alerts are very popular units because they are easy to install and will detect both vehicles and people walking. The radio operated drive alert consists of 2 parts - a transmitter and a receiver with four volume controlled tones. The receiver can be located in your house and plugged into a standard wall outlet.

The weatherproof outside transmitter will have an internal antennae to prevent it from breaking off. ( Operating range: -30°F to 120°F .) , operated by a 9 volt battery that normally lasts 6 months to 1 year, should be located in the area of your driveway about 20 feet from the edge of the driveway. The transmitter sends out an invisible beam approximately 40, 60 or 80 feet. The beam may be pointed in any direction since there is no reflector needed at the end of the beam. If a vehicle or person enters this area, the transmitter, which detects motion will send a radio signal up to 600’ back to the receiver in the house.

To virtually eliminate the possibility interference of a neighbors' driveway alarm interfering there are 256 different security codes

Several Wireless Motion alerts transmitters can be used with the same receiver. For example, you may have 2 driveways entering your place. You can also have extra receivers for additional locations such as a barn or shop.

Each receiver comes with choice of volume controlled  whistle, Westminster Chime, Ding Dong , or Classical tone. The rubber hose drive alert will work with all our optional driveway alarm accessories. Each receiver will have an On/Off Switch , four form "C" relays and a timed output of 4 seconds or 10 minutes for use with accessories.